Universal Corflute Bracket -is a plastic bracket specifically designed to hold flute board signs. Universal Corflute Bracket is reusable and can be secured to various support surfaces using a range of fixing methods.
 |
 |
 |
Features – Versatile • Reusable • Simply Brilliant
 |
It can hold all thicknesses of flute board between 3mm and 6mm. |  |
The ‘living hinge’ allows the fixing plate to bend and adapt to various support surfaces. |
 |
It has specially designed holes for various fixing systems. |
|
Environmentally friendly product. |
| Fitting Corflute Bracket | |||
 |
1. Insert the prongs of corflute bracket into the flutes of the flute board. |  |
2.Secure the corflute bracket to your sign by inserting two 6g x 18mm screws. |
| Flat Wall Install | |||
 |
1. Secure the the corflute bracket to flat surface using screws or nails. |  |
2. Then fit and secure your sign to the corflute bracket. |
| Corner Install | |||
 |
1. Holding the the corflute bracket onto corner, secure the the bracket in place. |  |
2. Then fit and secure your sign to the corflute bracket. |
| Pole Install | |||
 |
1. Fit and secure the corflute bracket to your sign, then insert cable ties through the bracket. |  |
2. Fit the corflute bracket to pole and tighten cable ties with pliers. |
| Dual Pole Install | |||
 |
1. Measure distance between poles and produce sign at 5mm less than distance measured. |  |
2. Fit and secure the corflute brackets to sign and then insert cable ties through the brackets. Install sign between poles and tighten cable ties with pliers. |
 |
Back to Corflute Boards | ||
 |
A Boards |